Do you know how to use a reflective film engraving machine?

As we know, the reflective film engraving machine is one of many types of cutting plotters, which mainly adopts advanced design and precision manufacturing mechanical structure. High speed cutting also has efficient quality, with smoother curves, sharper corners, and small fonts that do not change. Comparing with ordinary cutting plotters, it is significantly more efficient .

1. Turn on the power and check if the equipment is in normal condition, it is important to ensure that the equipment is functioning properly before proceeding with work. Non operators should not use their hands to disassemble the reflective film cutting machine to avoid injury.

2. Cutting,Place the reflective film into the paper inlet of the reflective film cutting machine, determines the accuracy position, fix it, and press the relevant button. Usually, when using a reflective film engraving machine for the first time, test is conducted, and after the test results are good, large-scale engraving can begin. You can select the corresponding project through the menu. If there are any issues, press the pause button to temporarily stop. After confirming that there are no errors, press the “OK” button to start the operation.

3. Put away the printed drawings and turn off the power.

4. After completing the operation using the reflective film cutting machine, the staff should turn off the equipment and check the usage status of each device. Only after confirming that there are no problems can the work be completed. This will make it more convenient to use the cutting machine for the next time. It is important to pay attention to these issues when using the engraving machine.

5. Clean the reflective film cutting and engraving machine to ensure it is clean for coming use.

The content introduced above is the usage method of the reflective film engraving machine. When operating and using the reflective film engraving machine, it must be the responsibility of professional personnel. It is not allowed for others to operate and use the equipment casually to avoid malfunction problems caused by improper operation methods. In addition, if it is the first time using a reflective film engraving machine, it is recommended that users first use the reflective film for engraving testing. First, print a sheet according to the specifications to see the effect, and ensure that there are no problems before putting it into use. This can avoid errors during large-scale engraving work and also save more raw materials and costs.